Our pass rate is high to 98.9% and the similarity percentage between our NS0-506 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Network Appliance NS0-506 exam in just one try? I am currently studying for the Network Appliance NS0-506 exam. Latest Network Appliance NS0-506 Test exam practice questions and answers, Try Network Appliance NS0-506 Brain Dumps First.

Q9. What is installed on your Linux host when you install the Linux Unified Host Utilities 7.0?

A. drivers and firmware

B. software iSCSI initiator

C. SAN Toolkit data collection utility

D. nSANity

Answer: C

Explanation: Reference:https://library.netapp.com/ecm/ecm_download_file/ECMP1654941


Q10. You have executed the following FC configuration workflow:

1. Verify IMT supported configuration.

2. Install VSC for VMware vSphere on a Windows Server.

3. Add the storage cluster to VSC and set recommended values. 

4.Update host HBA firmware and BIOS.

5. Provision the LUN.

6. Manually create an igroup and add the host WWPNs into it.

7. Map the LUN to the igroup.

8. Create datastore and its containing LUNS and volumes.

In step 8, you are not able to see the LUNs you provisioned on your storage controller. When you runigroup showyou see the ESX host’s initiators; however, they are listed “not logged in”.

What is the problem?

A. You need to configure ALUA.

B. TheLUN was not put online.

C. The LUN type is not set to type VMware.

D. You need to configure zoning.

Answer: D


Q11. Click the Exhibit button.

You have a 2-node data ONTAP 8.3 cluster.

Based on the exhibit, which change must be made to make svm1 conform to iSCSI best practices?

cl01::> net int show –vserver 

svm1 –data –protocol iscsi 

Logical Status Network 

Current Current Is

Vserver Interface Admin/Oper 

Address/Mask Node Port Home

----------- ---------- ------

---------------------- -----

-------- ------- ----

svm1

up/up 10.204.34.25/24 cl01-01

a0a 434 true

cl01::>iscsi show –vserver 

svm1

Vserver: svm1

Target Name: iqn.1992 – 

08.com.netapp: sn.ca5eaa069c211 

Target Alias: svm1

Administrative Status: up

A. The iSCSI LIFs must be moved to a VLANhigher than 1024.

B. An iSCSI LIF must be added to node cl01-02.

C. The Target Alias must be modified to match the Target Name.

D. The iSCSI LIFs must be moved to a physical interface; iSCSI LIFs are not supported on top of an ifgrp.

Answer: C


Q12. Click the Exhibit button.

Referring to the exhibit, how many pathsto the LUN are visible from the host?

A. 16

B. 8

C. 24

D. 32

Answer: B


Q13. A company has a 4-node Data ONTAP cluster called cl01. The administrator attempts to create a volumeon svm1 and can only select aggregates that are owned by node cl01-01 or cl01-02.

What is causing the problem?

A. The SVM peering relationshiphas not been configured with the cl01-03 and cl01-04 HA pair.

B. The storage virtual machine is not configured to use nodes cl01-03 or cl01-04.

C. No LIFs have been created on nodes cl01-03 or cl01-04.

D. Volume creation delegation is not configured to allow use of cl01-03 or cl01-04 owned aggregates.

Answer: B


Q14. Click the Exhibit button.

A customer has deployed a new FAS8080EX running clustered Data ONTAP 8.3. Host A is running multipath software that has been properly configured. Also, Host A is currently accessing a LUN using the FC protocol stored on Node A. Switch A, shown in the exhibit, fails.

What will happen next?

A. Node A will panic causing a storage failover to Node B.

B. Host A will lose all access to its LUN.

C. Host A will continue to access its LUN using Switch B through Node B.

D. Host A will continue to access its LUN using Switch B through Node A.

Answer: B


Q15. Which objects reside inside an igroup?

A. host initiators

B. LUNs

C. qtrees

D. volumes

Answer: A

Explanation: Reference:https://library.netapp.com/ecmdocs/ECMP1368845/html/GUID-BBD6165F- 0D72-46A4-B669-3B6D14F2C7C0.html


Q16. You have a large, heterogeneousSAN environment. You are asked to gather information for all hosts, HBAs, switches, and storage. You are also told that you must collect this information over network protocols without agents.

Which two NetApp tools allow you to perform this task? (Choose two.)

A. OnCommand Insight

B. OnCommand Report

C. OnCommand Unified Manager

D. nSANity

Answer: B