Downloadable 70-741 Braindumps 2021

NEW QUESTION 1
You have a DHCP server named Server1 that runs Windows Server 2021. Server1 has the scopes configured as shown in the following table.

All other scope settings are set to the default values. There is no available address space for another scope to be created.
Your network has 150 desktop computers that have access to the corporate network. Your company also provides visitors with WI-FI access to the network. There can be up to 200 visitors each day.
You discover that some visitors fail to access the WI-FI network because there are no available addresses to allocate to the visitors.
You need to prevent this issue from reoccurring. What should you do?

• A. For the Visitors scope, run the Dhcp Split Configuration Wizard.B Run Set-DhcpServerv4Scope -ActivatePolicies $True -Name Mobil -MaxBootPCIients 200
• B. Configure a superscope that contains the Visitors scope.D Run Set-DhcpServerv4Scope -Name Mobile -LeaseDuration 0.02:00:00

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/previous-versions/windows/desktop/dhcpserverpsprov/dhcpserverv4scope

NEW QUESTION 2
You have multiple servers that run Windows Server 2021.
You need to install the DNS Server server role on one of the servers. What should you run?

• A. dism.exe
• B. dns.exe
• C. dnscmd.exe
• D. netsh.exe
• E. Set-DhcpServerDatabase
• F. Set-DhcpServerv4DnsSetting
• G. Set-DhcpServerv6DnsSetting
• H. Set-DNSServerSetting

Answer: A

NEW QUESTION 3
You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2021.
You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
You discover that unauthorized computers can obtain an IP address from Server1.
You need to ensure that only authorized computers can receive an IP address from Server1. Solution: You run the following command.
Add-DHCPServer4Filter -ComputerName Server1 -MacAddress -List Deny
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/dhcpserver/add-dhcpserverv4filter?view=win10-ps

NEW QUESTION 4
You are configuring the network for a small branch office. Currently, the branch office does not connect directly to the Internet.
In the branch office, you deploy a new server named Server1 that has a server Core installation of Windows Server 2021. Server1 has two network adapters configured as shown in the following table.

You plan to use Server1 to provide Internet connectivity for the branch office.
Routing and Remote Access (RRAS) in installed and configured for VPN remote access on Server1. You need to configure RRAS on Server1 to provide network address translation (NAT).
Which command or cmdlet should you use first?

• A. New-NetNat Nat1 -ExternalIPInterfaceaddressPrefix 131.107.10.1/29
• B. netsh.exe routing ip nat install
• C. route.exe add 192.168.1.1 255.255.255.0 131.107.10.1 metric 1
• D. Enable-NetNatTransitionConfiguration

Answer: B

Explanation: References:
https://social.technet.microsoft.com/Forums/exchange/en-US/5cd50748-af62-4d29-ab92-1a010b9a1a9f/how-to-

NEW QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You open Device Manager and view the properties of the network adapters.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first node cluster of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

NEW QUESTION 8
Your network contains an Active Directory domain named contoso.com. The Functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows server 2021 standard. The domain contains 100 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

Answer:

Explanation:

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2. Server2 has the following configured:
Network address translation (NAT)
The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to Server2. You identify the following requirements:
Add 28 devices to subnet2 for a temporary project.
Configure Server2 to accept VPN connections from the internet.
Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. Which VPN protocol should you configure on Server2?

• A. L2TP
• B. IKEv2
• C. PPTP
• D. SSTP

Answer: C

NEW QUESTION 10
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1.
Server1 configured to use a forwarder named server2.contoso.com that has an IP address of 10.0.0.10. You need to prevent Server1 from using root hints if the forwarder is unavailable.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 11
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.

Answer:

Explanation:

NEW QUESTION 12
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machine shown in the following table.

All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?

• A. Configure network virtualization for VM1 and VM2.
• B. Modify the subnet mask of VM1 and VM2.
• C. On Server2, configure the VLAN ID setting of Switch1.
• D. On Server2, create an external switch and connect VM3 to the switch.

Answer: A

Explanation: https://blogs.technet.microsoft.com/networking/2021/10/26/network-virtualization-with-ws2021-sdn/

NEW QUESTION 13
You manage a Windows Server 2021 software-defined network.
Network Controller is installed on a three-node domain-joined cluster of virtual machines.
You need to add a new access control list (ACL) for the network controller to the network interface on a tenant virtual machine. The ACL will have only one rule that prevents only outbound traffic from the 10.10.10.0/24 subnet.
You plan to run the following Windows PowerShell commands.
$ruleproperties = new-object Microsoft.Windows.NetworkController.AclRuleProperties
$ruleproperties.SourcePortRange = “0-65535”
$ruleproperties.DestinationPortRange = “0-65535”
$ruleproperties.Action = “Deny”
$ruleproperties.Priority = “100”
$ruleproperties.Type = “Outbound”
$ruleproperties.Logging = “Enabled”
Which three remaining properties should you add to the rule? Each correct answer presents part of the solution. (Choose three.)
NOTE: Each correct selection is worth one point.

• A. $ruleproperties.SourceAddressPrefix = “10.10.10.0/24”
• B. $ruleproperties.DestinationAddressPrefix = “10.10.10.0/24”
• C. $ruleproperties.Protocol = “ALL”
• D. $ruleproperties.Protocol = “TCP”
• E. $ruleproperties.SourceAddressPrefix = “*”
• F. $ruleproperties.DestinationAddressPrefix = “*”

Answer: ACF

NEW QUESTION 14
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment.
Server1 has an IPv4 scope named Scope1.
You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1.
What should you do?

• A. From the properties of Scope1, modify the Conflict detection attempts setting.
• B. From the properties of Scope1, configure Name Protection.
• C. From the properties of IPv4, configure the bindings.
• D. From IPv4, create a new filter.
• E. From the properties of Scope1, create an exclusion range.
• F. From IPv4, run the DHCP Policy Configuration Wizard.
• G. From Control Panel, modify the properties of Ethernet.
• H. From Scope1, create a reservation.

Answer: C

Explanation: https://technet.microsoft.com/en-us/library/cc770650(v=ws.11).aspx

NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that has the Network Policy and Access Services server role installed. You create a Shared Secret Network Policy Server (NPS) template named Template1.
You need to view the shared secret string used for Template1.
Solution: From the Network Policy Server console, you export the templates, and you view the exported XML file.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 16
You have two servers named Server1 and Server2 that run Windows Server 2021. Both servers have the DHCP Server server role installed.
Server1 has a DHCP scope named Scope1. Server2 has a DHCP scope named Scope2.
You need to ensure that client computers can get an IP address if a single DHCP server fails. You must be able to control the percentage of requests to which each DHCP server responds during normal network operations.
What should you do?

• A. Add Server1 and Server2 as nodes in a failover cluster, and then configure the DHCP Server server role.
• B. Add Server1 and Server2 as nodes in a failover cluster, and then configure the quorum mode.
• C. On Server1 and Server2, configure DHCP failover for Scope1 and Scope2.
• D. Add Server1 and Server2 as nodes in a failover cluster, and then configure port rules for UDP 67 and UDP 68.

Answer: C

NEW QUESTION 17
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1. Namespace1 has the following configuration.

Namespace1 has a folder named Folder1.
Folder1 has the targets shown in the following table.

You have the site links shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation: https://ittutorials.net/microsoft/windows-server-2021/configure-dfs/

NEW QUESTION 18
You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2021. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers. What should you do?

• A. On Server2 run The New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdle
• B. Configure Server1 to provide the 003 Router option of 192.168.1.250.
• C. On Server2 run the New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdle
• D. Configure Server1 to provide the 003 Router option of 131.107.0.10.
• E. On Server1, stop the DHCP serve
• F. On the Internet network adapter on Server2, enable Internet Connection Sharing (ICS).
• G. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address spac
• H. On Server2, change the IP address of the internal network adapter to 131.107.0. 1. Configure Server 1 to provide the 003 Router option of 131.107.0. 1.

Answer: C

NEW QUESTION 19
You are deploying DirectAccess to a server named DA1. DA1 will be located behind a firewall and will have a single network adapter. The intermediary network will be IPv4.
You need to configure the firewall to support DirectAccess.
Which firewall rules should you create for each type of traffic? To answer, drag the appropriate ports and protocols to the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:

NEW QUESTION 20
You have an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2021. You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

• A. From Routing and Remote Access, configure the authentication provider.
• B. From the Connection Manager Administration Kit, create a Connection Manager profile.
• C. From Server Manager, create an Access Policy.
• D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Answer: A