We provide 70-741 dumps which are the best for clearing 70-741 test, and to get certified by Microsoft Networking with Windows Server 2021. The 70-741 dumps covers all the knowledge points of the real 70-741 exam. Crack your Microsoft 70-741 Exam with latest dumps, guaranteed!
Check 70-741 free dumps before getting the full version:
NEW QUESTION 1
You have a Hyper-V server named Server1 that runs Windows Server 2021. Server1 has an IP address of 192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP address of 172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named Server2 that has an IP address of 192.168.1.79, You need to connect to the web application from Server2. To which IP address and port should you connect?
- A. 172.16.5.6:80
- B. 192.168.1.78:80
- C. 172.16.5.6:84
- D. 192.168.1.78:84
Answer: C
NEW QUESTION 2
You have a DHCP server named Server1 that runs Windows Server 2021. You plan to implement IPv6 on your network.
You need to configure Server1 for stateless DHCPv6. What should you do from the DHCP console?
- A. Configure the Advanced Properties for Server1
- B. Configure the IPv6 Server Options
- C. Create an IPv6 scope
- D. Configure the General IPv6 Properties
Answer: B
NEW QUESTION 3
Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \contoso.comnamespace1.
The domain contains a file server named Server1 that runs Windows Server 2021. You create a folder named Folder1 on Server1.
You need to use Folder1 as a target for Namespace1.
Which two cmdlets should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. New-DfsnFolderTarget
- B. Install-WindowsFeature
- C. Grant-DfsnAccess
- D. New-DfsnFolder
- E. New-SmbShare
Answer: AC
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/dfsn/new-dfsnfoldertarget?view=win10-ps https://docs.microsoft.com/en-us/powershell/module/dfsn/grant-dfsnaccess?view=win10-ps
NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage –Edition Datacenter –DeploymentType Host –Package
Microsoft-NanoServerSCVMM-Package –MediaPath ‘D: -TargetPath C:nano1Nano1.wim
–ComputerName Nano1 – Domainname Contoso.com
Does this meet the goal?
- A. Yes
- B. NO
Answer: B
NEW QUESTION 5
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?
- A. the Data Center Bridging feature
- B. the Routing role service
- C. the Network Controller server role
- D. the Multipath I/O feature
- E. the Canary Network Diagnostics feature
Answer: D
Explanation: https://technet.microsoft.com/en-us/library/jj735302(v=ws.11).aspx
NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?
- A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
- B. From Windows PowerShell on Server1, run the Set-VmNetworkAdapter cmdlet.
- C. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.
- D. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfigurationcmdlet
Answer: A
NEW QUESTION 7
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.
Answer:
Explanation: 
NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on VM2. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 9
You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2021. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers. What should you do?
- A. On Server2, select the Internet and Internal network adapters and bridge the connection
- B. From the DHCP console on Server1, authorize Server2.
- C. On Server1, stop the DHCP serve
- D. On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).
- E. On Server2 run the New-NetNat –Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdle
- F. Configure Server1 to provide the 003 Router option of 131.107.0.10.
- G. Install the Routing role service on Server2 and configure the NAT routing protoco
- H. Configure Server1 to provide the 003 Router option of 192.168.1.250.
Answer: C
NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet. Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: The Add-DnsServerTrustAnchor command adds a trust anchor to a DNS server. A trust anchor (or trust “point”) is a public cryptographic key for a signed zone. Trust anchors must be configured on every
non-authoritative DNS server that will attempt to validate DNS data. Trust Anchors have no direct relation to
DSSEC validation.
References:
https://technet.microsoft.com/en-us/library/jj649932.aspx https://technet.microsoft.com/en-us/library/dn593672(v=ws.11).aspx
NEW QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of the servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation: https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning
NEW QUESTION 12
You have a virtual machine named VM1 that runs windows Server 2021. VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface. Quality of Service (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?
- A. Set-NetAdapterRss
- B. Set-NetAdapterRdma
- C. Set-NetAdapterSriov
- D. Set-NetAdapterQos
Answer: A
NEW QUESTION 13
You have two servers named Server1 and Server2. Server1 is a DNS server. Server2 is configured to use Server1 as the primary DNS server. You run ipconfig /displaydns on Server2 and receive the following output.
An administrator modifies the records in adatum.com as shown in the Adatum.com Zone exhibit. (Click the Exhibit button.)
The properties of the DNS record for ComputerA are shown in the ComputerA exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 14
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2021.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2. Solution: You run the Reconcile-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope
NEW QUESTION 15
You have three servers named Server1, Server2, and Server3 that run Windows Server 2021. On all three servers, Windows Firewall is configured to allow ICMP traffic. Server2 has two network adapters named NIC1 and NIC2.
Your network is configured as shown in the exhibit. (Click the Exhibit button.)
The parameters for NIC2 on Server1 are shown in the following output.
Which ping request will result in a reply from the destination host?
- A. From Server2, ping 192.168.15.1
- B. From Server3, ping 192.168.15.1
- C. From Server1, ping 172.16.0.1
- D. From Server1, ping 172.16.0.35
Answer: A
NEW QUESTION 16
You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2021. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Windows PowerShell, you run the Invoke-IpamServerProvisioning cmdlet.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/ipamserver/invoke-ipamserverprovisioning?view=win10-p
NEW QUESTION 17
Your company has five departments, including a web research department.
You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution.
You need to ensure that users in the web research department use DNS2 for name resolution.
- A. From the properties of Scope1, modify the Conflict detection attempts setting.
- B. From the properties of Scope1, configure Name Protection.
- C. From the properties of IPv4, configure the bindings.
- D. From IPv4, create a new filter.
- E. From the properties of Scope1, create an exclusion range.
- F. From IPv4, run the DHCP Policy Configuration Wizard.
- G. From Control Panel, modify the properties of Ethernet
- H. From Scope1 create a reservation.
Answer: A
NEW QUESTION 18
You have a server named Server1 that runs Windows Server 2021. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?
- A. the Network Controller server role
- B. the Data Center Bridging feature
- C. the Remote Access server role
- D. the Network Policy and Access Services server role
Answer: C
NEW QUESTION 19
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has multiple network adapters that have virtual machine queue (VMQ) enabled.
On Server1, you create a virtual machine named VM1 as shown in the exhibit.
You need to ensure that you can use virtual Receive-side Scaling (vRSS) on VM1.
What should you do?
- A. Add additional memory.
- B. Add additional processors.
- C. Add additional network adapters.
- D. Enable the Data Exchange integration service.
Answer: B
Explanation: References: https://docs.microsoft.com/en-us/windows-server/networking/technologies/vrss/vrss-top
NEW QUESTION 20
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2021.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:DHCPBackup. What should you run?
- A. dism.exe
- B. dns.exe
- C. dnscmd.exe
- D. netsh.exe
- E. Set-DhcpServerDatabase
- F. Set-DhcpServerv4DnsSetting
- G. Set-DhcpServerv6DnsSetting
- H. Set-DNSServerSetting
Answer: E
Recommend!! Get the Full 70-741 dumps in VCE and PDF From 2passeasy, Welcome to Download: https://www.2passeasy.com/dumps/70-741/ (New 235 Q&As Version)