Best Quality 70-741 Study Guides 2021

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
The settings for VM1 are configured as shown in the exhibit below.

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You start the Hyper-V Guest Service Interface service on VM1. Does this meet the goal?

• A. YES
• B. NO

Answer: B

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Server Manager, You modify the Access Policies on Server1.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 3
Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed. IPAM has the following configuration.

The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)

The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation:

NEW QUESTION 4
Your network contains an Active Directory forest named contoso.com. The functional level of the forest is Windows Server 2012.
The forest contains five domain controllers and five VPN servers that run Windows Server 2021. Five hundred users connect to the VPN servers daily.
You need to configure a new server named Server1 as a RADIUS server. What should you do first?

• A. On Server1, deploy the Remote Access server role.
• B. On Server1, deploy the Network Policy and Access Services role.
• C. On a domain controller, set the forest functional level to Windows Server 2021.
• D. On each VPN server, run the New-NpsRadiusClient cmdlet.

Answer: B

Explanation: http://www.nyazit.com/configure-network-policy-server-2021/

NEW QUESTION 5
You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.
You deploy a new server named Web1 that has an IP address of 10.0.0.211.
A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.
What command should you run from NAT1? To answer, select the appropriate options in the answer area.

Answer:

Explanation: https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping

NEW QUESTION 6
You have multiple subnets.
On one of the subnets, you install a server named Server1 that runs Windows Server 2021. Server1 has the following IPv6 addresses:
ff00:e378:8000::63bf:3fff:fdd2
fe80::200:5aee:feaa:20a2
fc00:fdf8:f53b:82e4::53
2000:1516::6c:2348
Which IPv6 address is used when Server1 communicates with different hosts? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References: https://technet.microsoft.com/pt-pt/library/cc757359(v=ws.10).aspx

NEW QUESTION 7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
Users report that when they turn on their client computers, it takes a long time to access the network. You validate that it takes a long time for the computers to receive an IP address from Server1.
You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address.
You need to reduce the amount of time it takes for the computers to receive an IP address. What should you do?

• A. From the properties of Scope1, modify the Conflict detection attempts setting.
• B. From the properties of Scope1, configure Name Protection.
• C. From the properties of IPv4, configure the bindings.
• D. From IPv4, create a new filter.
• E. From the properties of Scope1, create an exclusion range.
• F. From IPv4, run the DHCP Policy Configuration Wizard.
• G. From Control Panel, modify the properties of Ethernet.
• H. From Scope1, create a reservation.

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You modify the Zone Aging/Scavenging properties of the zone. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx

NEW QUESTION 9
You have an IP Filters Network Policy Server (NPS) template that is used by an NPS policy. The IP filters are configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 10
You have a DNS server named Server1 that runs Windows Server 2021. Server 1 has a forward lookup scope for Contoso.com. The records in the zone are shown in the exhibit. (Click the Exhibit button.)
Exhibit:

You run the following commands on Server1.

What are two results of the configuration? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

• A. When a client computer that has an IP address of 172.16.0.10 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.99.99.
• B. When a client computer that has an IP address of 172.16.0.10 attempts to resolve host1.contoso.com, the name resolution fails to return an IP address.
• C. When a client computer that has an IP address of 172.16.1.56 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.99.99.
• D. When a client computer that has an IP address of 172.16.1.56 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.0.100.
• E. When a client computer that has an IP address of 172.16.1.56 attempts to resolve host1.contoso.com, the name resolution fails to return an IP address.
• F. When a client computer that has an IP address of 172.16.0.10 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.0.100.

Answer: BE

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/dnsserver/add-dnsserverqueryresolutionpolicy?view=win1

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

You have the following subnets defined on Server1.

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServerQueryResolutionPolicy cmdlet. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: https://technet.microsoft.com/en-us/itpro/powershell/windows/dns-server/add-dnsserverqueryresolutionpolicy

NEW QUESTION 12
You have a server named Server1 that runs Windows Server 2021. You install the Hyper-V server role on Server1. Server1 has eight network adapters that are dedicated to virtual machines. The network adapters are Remote Direct Memory Access (RDMA)-enabled.
You plan to use Software Defined Networking (SDN). You will host the virtual machines for multiple tenants on the Hyper-V host.
You need to ensure that the network connections for the virtual machines are resilient if one or more physical network adapters fail.
What should you implement?

• A. single root I/O virtualization (SR-IOV)
• B. NIC Teaming on the Hyper-V host
• C. virtual Receive-side Scaling (vRSS)
• D. Switch Embedded Teaming (SET)

Answer: D

NEW QUESTION 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: Network List Manager Policies are security settings that you can use to configure different aspects of how networks are listed and displayed on one computer or on many computers.
Network List Manager Policies are not related to DNSSEC.
References: https://technet.microsoft.com/en-us/library/jj966256(v=ws.11).aspx

NEW QUESTION 14
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet.
Your company has the following policy for allocating IP addresses:
All server addresses must be excluded from DHCP scopes.
All client computer must receive IP addresses from Scope1.
All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240
All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199. You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?

• A. Add-DhcpServerv4Lease
• B. Add-DhcpServerv4ExclusionRange
• C. Add-DhcpServerv4Filter
• D. Add-DhcpServerv4Reservation

Answer: D

NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You run the Get-NetAdapterSriov cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/netadapter/get-netadaptersriov?view=win10-ps

NEW QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. IPAM users a Windows Internal Database. You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 17
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host.
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)-capable. You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The
solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which command should you run first? To answer, select the appropriate options in the answer area.

Answer:

Explanation: https://technet.microsoft.com/en-us/library/mt403349.aspx

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit.

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You authorize the server. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 19
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You add a computer to subnet1. The computer has an IP address of 10.10.0.129
Web1 receives a request from the new computer and sends a response. What should you do?

• A. 10.10.0.129
• B. 10.10.0.224
• C. 131.107.0.223
• D. 172.16.128.222

Answer: C

NEW QUESTION 20
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.

Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.

You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.
Which two actions should you perform? Each correct answer presents part of the solution.

• A. Create a scheduled task that runs the Remove-Computer cmdlet.
• B. Modify the Zone Aging/Scavenging Properties of the zone.
• C. Modify the Time to live (TTL) value of the start of authority (SOA) record.
• D. Set the Scavenging period of Server1.
• E. Modify the Expires after value of the start of authority (SOA) record.

Answer: BD

Explanation: https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx